Spouted Pouch Filling & Capping Machine — Dual-Head

Spouted pouch filling and capping machine — rotary carousel with filling and capping heads

From US$1,000 · FOB Guangzhou

Final price depends on tube or pouch size, material and output. Send your sample specification for an exact quote.

Spouted pouch filling and capping machine — rotary carousel with filling and capping stations

A spouted pouch filling and capping machine fills your product through the spout and seals the cap in one continuous pass — no open bag, no manual handling, no headspace you have to fight afterwards. This dual-head platform is built for sauce, dairy, cosmetic and home-care pouches, where the same line has to run several SKUs a week and changeover time decides whether the machine pays for itself.

Filling heads
2 (dual-head)
Accuracy
±1%
Automation
Fully automatic
Filling type
Atmospheric
Power
7.5 kW
Gallery

On the Machine

Dual-head spouted pouch filling and capping machine with rotary carousel and swing-arm touch screen
Complete machine: rotary carousel, two filling heads, capping station, swing-arm HMI
Spouted pouch filling heads dosing product through the spout
Filling heads dosing through the spout
Filling nozzles and capping heads above the pouch carousel
Filling nozzles and capping heads

What the machine actually does

Pouches enter the machine flat, are separated by the indexing conveyor and presented to the filling station spout-up. Two filling heads dose simultaneously, so the machine does two pouches per cycle instead of one. The filled pouch then moves to the capping station, where the cap is placed and torque-tightened, and finally leaves the machine ready for cartoning or shrink wrapping.

Because dosing is volumetric through the spout, the product never touches an open surface. That is what keeps sauces and dairy from picking up air, and what makes the sealed pouch shelf-stable without a separate pasteurisation step for the headspace.

Ready to price your pouch? Send the spout diameter, the fill volume and the product viscosity — that is enough for us to quote.

From flat pouch to capped pouch

1
Pouch loading
Pouches are loaded into the magazine in a stack. The vacuum pick-up takes the top pouch and places it on the indexing conveyor, spout facing up.
2
Spout opening & positioning
The pouch is clamped and the spout is opened and centred under the filling head, so the nozzle enters cleanly without touching the pouch wall.
3
Dual-head filling
Two heads dose at the same time by volumetric displacement. Fill volume is set once per SKU on the HMI; accuracy holds within ±1% across the run.
4
Cap placement
Caps are fed from the cap hopper, positioned onto the spout and pressed into place — no operator handling at this stage.
5
Torque capping & discharge
The cap is tightened to a repeatable torque and the finished pouch is discharged to the collection table or to the next machine on the line.

Machine parameters

Values marked “quoted against” are set by your pouch format — they are not fixed machine limits.
Filling heads 2 (dual-head, simultaneous dosing)
Filling accuracy ±1%
Filling principle Atmospheric (volumetric) filling
Degree of automation Fully automatic
Total power 7.5 kW
Pouch format Spouted / nozzle pouches, flat-loaded
Fill volume range Quoted against your pouch volume
Pouch dimensions Quoted against your pouch drawing
Cap type Spout cap, press and torque
Conveyor Indexing, spout-up presentation
Control PLC with touch-screen HMI
Body Stainless-steel frame, washable surfaces
Warranty 12 months on the machine

We do not publish a single output figure for this machine, because output on a spouted pouch line is set by fill volume, product viscosity and cap style, not by the machine alone. Give us the pouch and the product, and we will confirm the realistic hourly output in writing before you order.

Products it runs

●Sauces and pastes — tomato, chilli, seasoning, fruit purée
●Dairy — yogurt, drinking yogurt, fresh milk, cream
●Oral liquids and liquid nutrition
●Cosmetics — lotion, gel, cleanser, serum
●Hair care — shampoo, conditioner, treatment
●Home care — detergent, softener, cleaner
●Edible oil and condiments
●Skincare and personal-care samples

If your product carries solids, is very high viscosity, or needs hot fill, say so up front — the dosing system and the spout path change accordingly.

What to send us for an accurate quote

●Pouch drawing or sample: spout diameter, pouch width and height
●Fill volume per pouch, in ml or g
●Product and viscosity — water-like, cream, paste, or with pieces
●Cap style and cap material
●Target output per hour or per shift
●Whether the machine feeds a cartoner or a shrink wrapper afterwards
●Voltage and frequency at your site
●Destination country, if you need export packing and documents

Where it fits in a line

The pouch and the cap both arrive finished; this machine only fills through the spout and closes it. That makes the line around it simple — and it also means most quality problems start before the pouch ever reaches the machine.

Stage What happens What it needs from you
Upstream Pre-made spouted pouches in the magazine, caps in the cap feeder. Pouches have to be flat and spout-up in the stack to feed at all. Pouches from a supplier who holds dimensional tolerance, and caps to the same thread spec — mixed cap lots are the usual cause of torque faults
This machine Pouch pick → spout presented to the filling head → dual-head atmospheric dosing → cap press and torque → discharge. Fill volume, product viscosity, and the torque your cap needs to seal without cracking
Downstream Capped pouches to a collection tray, a cartoner, or a case packer. Space at the discharge end for whatever comes next
Optional Coding on the cap or on a printable panel of the pouch. Where the code has to go, and whether the pouch has a panel that will take it

Installation: what the site has to provide

  • Power — 7.5 kW. Confirm the supply on site — this is the heaviest machine in the range.
  • Air — Required for the pneumatic stations. Pressure and consumption depend on head count and conveyor length, so they are confirmed on the layout drawing rather than quoted as a single figure.
  • Floor — Footprint depends on head count and conveyor length; the layout drawing is issued with the quotation so it can be checked against the space you actually have.
  • Hygiene — Stainless frame with washable surfaces. If the product is food or pharmaceutical, say so at enquiry — surface finish, guarding and documentation change, and retrofitting them later is expensive.

Changeover: what changes with a new tube or a new product

  • Pouch format — clamps and spout guides, quoted against your pouch drawing. Width and spout position both matter, and a tolerance change from the supplier can be enough to stop reliable feeding.
  • Fill volume — dosing time, saved as a recipe.
  • Cap type — torque head and press depth. A different cap supplier is a different changeover, even with the same nominal thread.

Two heads do not double output on a viscous product. Dosing time sets the cycle, and a second head only helps if the product flows fast enough to fill both inside one cycle — which is why the honest answer to “how fast is it” depends on the product, not the machine. This guide compares how different product types load a filler, and the machine index puts this one next to the tube machines it often runs beside.

Troubleshooting: what the symptom tells you

The spouted pouch station fails in a different way to a tube machine: the pouch and the cap arrive pre-made, so the machine can only be blamed for dosing, cap torque and pouch location.

Symptom Most likely cause What to do
Fill volume below target Atmospheric dosing time too short for the product viscosity Extend the dosing time before increasing pressure; if the product is cold, warm it to bring viscosity down
Cap loose or cross-threaded Torque setting low, or cap dimensional tolerance out of spec Measure torque on a sample of ten, then check the cap lot. Cross-threading usually means the cap was presented off-centre
Pouch sits crooked in the clamp Clamp worn, or pouch width outside the supplier tolerance Replace the clamp; then check pouch width across the lot before blaming the machine
Product leaking at the spout after capping Spout weld quality from the pouch supplier, not the filling machine Pressure-test empty pouches from the same lot. A leak at the spout that appears before filling is a pouch problem
Output below expectation Dosing time is the bottleneck, not the mechanics Check where the cycle time is actually spent; on viscous products the dosing station sets the pace and two heads do not double output

Pouches and caps arrive pre-made, so half the faults on this station are incoming-material faults. Test the incoming lot before adjusting the machine.

Questions buyers ask before ordering

Can one machine run several pouch sizes?
Yes, within the format range we confirm for your machine. Changeover is a matter of swapping the pouch magazine and the filling-head tooling and calling up the recipe on the HMI. Send us every SKU you plan to run and we will confirm which ones share tooling and which need a second set.
Does it fill and cap, or only fill?
Both, in one pass. The machine fills through the spout, places the cap and torque-tightens it. That is what makes it a single-station line rather than two machines and a conveyor between them.
How accurate is the fill?
±1% on the products this platform is designed for. On very high-viscosity products or products with pieces, the achievable tolerance depends on the dosing option — we confirm it on your sample before the order, not after.
What about spare parts and support?
Sealing and capping wear parts — nozzles, cap chucks, grippers, sensors — are stocked as standard items. We supply installation guidance, parameter setup and a parameter sheet written for your product, so the line can be restarted without us on site.

Related guides

Send your pouch, get a line quotation
Pouch drawing, fill volume and product — that is all we need to come back with the right configuration, the tooling list and a delivery date.

Related machines

Leave a Reply

Your email address will not be published. Required fields are marked *