Contact HTKC

Talk to the factory directly: +86 185 2000 6634 (phone and WhatsApp), xiexuetao@htkcai.com. The workshop is at No. 54, Heting Middle Road, Renhe Town, Baiyun District, Guangzhou 510470, China. Quotes and technical answers come from the same people who assemble and test the machines — there is no separate sales floor to be passed to.

Ways to reach us

Channel Detail Best for
WhatsApp +86 185 2000 6634 Fastest route for tube drawings, photos, short videos of a problem
Phone +86 185 2000 6634 Specification calls, scheduling a factory visit
Email xiexuetao@htkcai.com Formal quotations, purchase orders, documentation
Factory No. 54, Heting Middle Road, Renhe Town, Baiyun District, Guangzhou 510470, China Seeing a machine run on your own samples
Hours Monday to Saturday, Guangzhou time (GMT+8). Messages outside those hours are answered the next working morning.
The fastest possible answer

Send four things in one message: tube diameter and length, tube material (plastic, laminated or aluminium), fill volume in millilitres, and the output you need per shift. With those four, the reply is normally a named platform and a price rather than a request for more information.

What to put in an inquiry

The difference between a quotation in one exchange and a quotation in six is usually just completeness. These are the items that get asked for, so sending them up front removes the round trips:

  1. Pack specification. Tube: sealing diameter, total length, material and layer structure. Pouch: width, height, spout type and cap diameter.
  2. Fill volume. In millilitres, plus the target fill accuracy if it is critical.
  3. Product. What goes in the tube, and its viscosity. Two-component products need both components named.
  4. Output. Tubes or pouches per shift, or per minute. State whether this is a current requirement or a three-year target — they lead to different recommendations.
  5. Print and registration. What has to be printed (date, batch, expiry) and whether the seal or trim must register to artwork.
  6. Destination. Country and port, plus the supply voltage and frequency. Voltage is settled at order and cannot be changed once the electrical build starts.
  7. Samples. Whether you can send tubes or pouches for a test run. This is the step that converts a quotation into a tested machine.

Sample runs

A sample run is the recommended first step and it costs nothing but the shipping. Send a minimum of 50 tubes or pouches — enough to set parameters and to see how the material behaves once the machine is warm.

What comes back: video of the run, the parameters used (sealing energy or time, jaw pressure, fill dose, tunnel temperature and belt speed), an assessment of whether the tube suits the platform, and a quotation with tooling listed as separate line items. If the tube does not suit the machine, that is stated plainly rather than worked around.

Visiting the factory

Visits are welcome. The address is No. 54, Heting Middle Road, Renhe Town, Baiyun District, Guangzhou 510470 — roughly 20–30 minutes by car from Guangzhou Baiyun International Airport, depending on traffic.

Give a few days’ notice and say which platform you want to see. The reason for the notice is practical: with one or two machines in build at a time, the machine you want to watch may currently be in pieces. Notice means a machine of the right type is assembled and running when you arrive, and your samples can be run while you are there.

After the order

Orders are handled through the same channel they came in on — there is no handover to a different team. During build you get photographs at the assembly and power-on stages, and the parameter sheet from the sample run ships with the machine.

After delivery, support covers installation guidance, parameter setup against that sheet, and spare parts quoted by part number. The machine carries a twelve-month warranty; wear parts are consumables and are listed on the spare-parts sheet so they can be stocked before the first failure rather than ordered in a panic.

Questions buyers ask before ordering

How quickly will I get a reply?
Messages arriving during Guangzhou working hours (Monday to Saturday, GMT+8) are normally answered the same day. A complete inquiry — tube specification, fill volume, output, destination — can usually be answered with a price rather than a follow-up question.
Can I get a quotation without sending samples?
Yes. A tube drawing with diameter, length, wall thickness and material is enough to quote the machine and the tooling. What a drawing cannot confirm is how the tube behaves in the sealing jaws, so the sample run comes after the quotation rather than instead of it.
Do you sell to distributors as well as end users?
Yes, and the terms are the same on both sides: the platform is specified against the pack, not against a target volume. For distributors the useful conversation is which two or three platforms to hold as demonstration machines for the local market.
Which languages do you work in?
English and Chinese, in writing and on the phone.

Related reading

All machines and guides
The four platforms in one place, with the parameters that decide fit.

About the factory
The legal entity, the 500 m² floor in Renhe, and how a machine gets built and tested.

Frequently asked questions
Twenty-four answers on tube materials, seal failures, output, tooling and spare parts.

Tell us your tube or pouch spec

Nine fields, no attachments needed. We reply with the model, tooling list and lead time — usually within one working day.