.htkc-tbl{overflow-x:auto;-webkit-overflow-scrolling:touch;margin:22px 0;max-width:100%}
.htkc-tbl table{width:100%;min-width:600px;border-collapse:collapse;font-family:Montserrat,Roboto,sans-serif;font-size:15.5px;color:#333}
@media (max-width:700px){
.htkc-tbl table{min-width:0!important;font-size:13px;line-height:1.55}
.htkc-tbl th,.htkc-tbl td{padding:8px 7px!important;word-break:normal!important;overflow-wrap:break-word;-webkit-hyphens:auto;hyphens:auto}
}
The tube you package in decides more than how your product looks on the shelf — it decides which filling and sealing technology your line needs. Choose the tube material first, and the machine follows. A plastic tube seals by welding; an aluminium tube seals by folding. Mix them up and you buy the wrong machine.
This guide covers the three materials you will actually be quoted on — all-plastic, laminated composite, and aluminium — how each one behaves on a filling line, what it costs you over the life of the product, and the four questions that settle the choice before you sign a machine order.
Three tube materials at a glance
Plastic tubes (PE) — a single extruded or injection-moulded plastic body, the lowest-cost option, flexible, and welded shut by heat or ultrasonic energy. Common for creams, gels, ointments and lotions sold at everyday price points.
Laminated / composite tubes (ABL, PBL) — a multi-layer film with an aluminium barrier layer, printed flat as a web and then formed into a tube and welded shut. Best print quality and barrier performance; the standard for toothpaste and premium cosmetics.
Aluminium tubes (metal) — a fully metallic body, closed by folding and crimping rather than welding, with the strongest barrier of the three. Common for pharmaceutical ointments, adhesives, sealants and artist paints.
| Material | Sealing method | Cost | Barrier | Print / shelf appeal |
|---|---|---|---|---|
| Plastic (PE) | Heat or ultrasonic weld | Lowest | Basic | Good |
| Laminated (ABL / PBL) | Heat or ultrasonic weld | Mid | High (aluminium layer) | Best |
| Aluminium (metal) | Fold / crimp | Higher | Highest | Metallic finish |
How material drives the machine
Plastic and laminated tubes are closed by welding — either heat or ultrasonic. Aluminium tubes are closed by folding and crimping. The sealing station on the machine is built for one process, so the tube material is the first thing a manufacturer asks before quoting. It is not a sales habit; it is because the sealing station, the tube holder and the orientation mechanism are all cut for a specific tube construction.
Inside the weld family there is a second split. Heat sealing presses a heated jaw against the tube shoulder and tail; ultrasonic sealing vibrates the material until it fuses. On thin laminated film the two are not interchangeable in practice — ultrasonic is far more forgiving of film thickness variation and product contamination in the seal area, while heat sealing needs a clean, dry seal zone to hold a consistent seam. Our separate comparison covers the trade-off in detail: ultrasonic vs heat sealing.
Diameter and length also drive the tooling. HTKC machines cover 15–50 mm diameter and 50–260 mm length across the range, with change parts for multiple tube sizes. If you plan to run more than one tube size, ask for the change-part list and the changeover time at quotation stage — that number, not the machine price, decides whether small runs stay economical.
ABL or PBL: the distinction buyers get wrong
Both are laminate tubes — the trade also sells them as laminate packaging tubes — with an aluminium barrier layer, and both are welded shut, so either one runs on the same sealing station. The difference is in the body structure: ABL uses an aluminium foil core, PBL uses a plastic barrier layer in place of the foil. That single change moves three things at once:
- Barrier — the foil core gives ABL the tighter barrier against oxygen, water vapour and fragrance loss. Products with oxidation-sensitive actives, or a scent that must survive twelve months on shelf, are the usual reason buyers stay on ABL.
- Appearance — PBL is the all-plastic look: no metallic sheen, and the body can be made to match the cap and label. ABL keeps a metallic read under the print.
- Recycling story — PBL is the easier claim to make in markets where packaging recovery rules are tightening. If your retail customer asks for a mono-material direction, this is where the conversation starts.
Neither choice changes the filling machine. Both change what you must tell your tube supplier, and both change how the tube behaves on the shelf. A fuller side-by-side is in our laminated vs all-plastic tubes comparison.
Fill accuracy by material
Fill accuracy is set by the dosing system, not the tube material. A servo piston filler gives ±1 g across the range, and the HT220 reaches ±1% at 20–50 tubes/min. For very small single-dose tubes (0.2–2.5 ml), a ceramic pump replaces the piston for ±0.05 g precision.
Material does affect one thing around dosing: how the product behaves when it leaves the nozzle. A stiff ointment in an aluminium tube is usually filled warm and sets as it cools; the same product in a PE tube may need a wider nozzle and a slower fill to avoid trapping air at the shoulder. If your formula is viscous or shear-sensitive, say so at quotation stage — the nozzle and the fill profile are specified together with the tube.
Cost, barrier and shelf-appeal trade-offs
The tube is a running cost, not a one-off. A cheaper tube that forces a shorter shelf life, a reformulation, or a returns problem costs more than the difference on the purchase order. Compare the three on the four axes that actually move the decision:
| Decision axis | Plastic (PE) | Laminated (ABL / PBL) | Aluminium |
|---|---|---|---|
| Unit cost | Lowest | Mid | Highest |
| Oxygen / moisture barrier | Basic | High | Highest |
| Print quality | Good | Best (flat-web print) | Metallic finish |
| Sealing station needed | Heat or ultrasonic | Heat or ultrasonic | Fold / crimp only |
| Squeeze-back / denting | Recovers shape | Recovers shape | Dents and stays dented |
Choosing by product, not by preference
In practice most buyers do not pick a material in the abstract — they pick it against a product and a market. These are the pairings that come up most often in quotations:
- Pharmaceutical ointments and topical gels — aluminium, for the barrier and because the fold is the accepted closure in regulated markets. Runs on a folding machine, not a welder.
- Toothpaste and premium skincare — laminated, almost always ABL. The flat-web print is the reason the decoration looks the way it does.
- Mass-market hand cream, body lotion, hair gel — all-plastic PE. Barrier is adequate, cost is the driver, and the squeeze-back feel is part of the product experience.
- Adhesives, sealants, artist paints — aluminium, for solvent resistance and because the fold holds under pressure.
- Samples and single-dose actives — small-diameter plastic or laminated, 0.2–2.5 ml, with a ceramic pump on the filler. See single-dose tube filling.
Four questions that settle it
Before you ask for a machine quotation, answer these in writing. They take ten minutes and they prevent the expensive version of this decision — buying a welder for a tube you later switch to aluminium.
- What shelf life must the product hold, and in which climate? A twelve-month claim in a hot, humid market is a barrier question, and it usually points at ABL or aluminium.
- Does the formula contain an active that oxidises, or a fragrance that must not migrate? Either one rules out a basic PE tube.
- How many tube sizes will you run in the first two years? Two or more means change parts and changeover time matter more than top speed.
- What does your retail customer accept? Some markets now ask for a recyclability position on the pack; that answer can override a cost calculation.
Matching HTKC machines to your material
- Plastic / laminated — TY-001 and TY-006 (ultrasonic) or HT220 (heat sealing).
- Aluminium — AT300-A (folding/crimping).
- Multiple formats — tell us your tube and we recommend the right station and change parts.
If you are still at the stage of comparing machine types rather than materials, start with the complete guide to tube filling & sealing machines, then come back to the material question — the material choice is what makes the model choice final.
FAQ
Can one machine run both plastic and aluminium tubes?
Not on the same sealing station. Welding and folding are different processes with different tooling. A line can be built with both stations, but that is a decision made at order stage, not something added later.
Does tube material change the machine price?
Yes, mainly through the sealing station and the change parts. A folding station for aluminium is a different cost from an ultrasonic welder, and multi-size tooling adds to both. Our product pages start from US$1,000 FOB Guangzhou for the entry model; the final figure depends on diameter, material and output.
What tube sizes can be run on one machine?
The HTKC range covers 15–50 mm diameter and 50–260 mm length. A single machine runs a subset of that with the right change parts; the practical limit is how many changeovers your production schedule can absorb.
Can I test my own tubes before buying?
Yes, and you should. Send your tubes and your product and ask for a sealing test on the proposed station. A tube that seals badly on the demo machine will seal badly on yours — better to find that before the order than after installation.
Is aluminium being replaced by plastic?
In mass-market cosmetics, largely yes. In pharmaceutical ointments and solvent-based products it is not, because the barrier and the fold are functional requirements rather than decoration. The shift is product-specific, not universal.
The terms used here — ABL, PBL, extruded, laminated, sealant layer — are defined in the tube filling glossary, and “which machine do I need for plastic tubes” is answered in the FAQ.
