Ultrasonic Tube Sealing & Filling Machines for Cosmetics, Pharma and Food

Ultrasonic tube sealing and filling, aluminium tube crimping, spouted pouch filling, cartoning and shrink wrapping — four machines in the range, all with PLC control, colour-mark registration and stainless-steel construction. Tell us your tube or pouch spec and your target output, and we will confirm the model, tooling and schedule.

7–13tubes / minute (TY-001)
Ø15–50 mmsealing diameter
50–260 mmtube length range
PLC + HMItouch-screen control
Machines

Tube filling and sealing — semi-automatic or fully automatic

These two tube platforms are the core of the range, each configured against the tube you actually run. Below them sit the spouted pouch filler and the pillow shrink wrapper that complete the line.

Semi-automatic ultrasonic tube sealing machine TY-001 with PLC touch screen and sealing head

Semi-Automatic Ultrasonic Tube Sealing Machine — Model TY-001

One tube at a time: the operator loads a tube, then colour-mark registration, ultrasonic sealing and tail trimming run automatically under PLC control. For plastic and laminated tubes — also sold as an aluminium tube folding machine.

Output
7–13 tubes/min
Sealing Ø
15–50 mm
Tube length
50–260 mm
Body
304 stainless steel
Full specification and how it seals →
Fully automatic mother-and-child dual-chamber tube filling and sealing machine with two hoppers and rotary carousel

Fully Automatic Mother-and-Child Tube Filling & Sealing Machine

Tubes are fed from the magazine automatically, two servo fillers dose the outer and inner barrel, and the tail is ultrasonically sealed, trimmed and ejected in one continuous cycle — for two-component cosmetics, gels and adhesives.

Tube type
Dual-chamber / mother-and-child
Operation
Fully automatic, PLC control
Output
10–15 tubes/min
Fill volume
10–150 ml per barrel
Full specification and filling detail →

See all four machines, with full parameters and the buying guides →

More machines

Pouches and shrink packs, on the same bench

The other two machines in the range — one for filling spouted pouches, one for wrapping the finished pack.

Spouted pouch filling and capping machine with rotary carousel ◒

Spouted pouch filling & capping — dual-head

Fill and cap stand-up spouted pouches in one pass: two filling heads, ±1% accuracy, atmospheric dosing, fully automatic. Built for sauce, dairy and cosmetic pouches.

Full specification →
Pillow-type shrink wrapping machine with shrink tunnel ▬

Pillow-type shrink wrapping machine — automatic

30–150 packs per minute, 60–320 mm bag length, POF or PVC film and an integrated shrink tunnel — the pack is formed, sealed and shrunk in one continuous flow.

Full specification →

Need a station that is not on this page? Automatic cartoning, L-sealing, liquid filling and POF / low-temperature shrink film are quoted station by station as part of a complete line — tell us the product and the pack format and we will map it.

Engineering detail

What decides whether a seal holds

Four things we engineer into every unit, because they are what actually shows up on the tube.

◎

Ultrasonic sealing

High-frequency vibration generates heat only at the joint, so the tube wall fuses while the area around it stays cool. No glue, no hot air, no burnt edges.

▣

Colour-mark registration

A photoelectric sensor reads the print registration mark, so the seal line and the printed date or batch code land in the same place tube after tube.

⌗

PLC + touch-screen HMI

Sealing time, pressure and trim are set on screen and stored, so a parameter change on day shift does not become a scrap run on night shift.

◫

304 stainless steel frame

Washdown-friendly construction for cosmetic and pharmaceutical rooms, with the sealing head and trim blade accessible for daily cleaning.

Applications

Where our tube sealing lines run

Tube-end sealing and tube filling across four industries — the machine is set up for the product, not the other way round.

Cosmetics & personal care Pharmaceutical ointments & gels Food & condiment tubes Industrial adhesives & sealants Oral care Hair colour & two-component products
About HTKC

A small factory, and the whole line behind it

HTKC is the export brand of Guangzhou Tengyue Automation Equipment Co., Ltd. — a factory, not a trading company. Founded in 2024, the workshop covers 500 m² in Renhe, Baiyun District, Guangzhou, where the machines are assembled, wired and run-tested before they ship.

The core of the range is tube filling and sealing: single-dose and aircraft tubes, mother-and-child dual-chamber tubes, aluminium tube crimping. Around that core sit the other stations a packaging line needs — spouted pouch filling and capping, automatic cartoning, L-sealing, pillow-type shrink wrapping and liquid filling — plus the POF, low-temperature and cross-linked film that runs on the wrappers.

Being small is the working model rather than an apology. There is no trading layer between you and the bench, and the person who answers your inquiry is the person who builds and tests the machine. Every unit is run against your own tube or pouch samples before it leaves, and you get the video of that run.

Every line is quoted against what you actually pack: tube or pouch diameter, material, print registration, carton size and the output your line has to hit. We confirm those before pricing, because a station that is “close enough” on pack size turns into scrap on your line.

Support covers installation guidance, parameter setup, and spare parts for sealing heads, crimping jaws, trim blades and registration sensors.

  • 2024founded, Guangzhou
  • 500 m²assembly and test floor
  • Factory-directno trading layer
  • Run-testedon your tube samples
Sealed tubes produced on an ultrasonic tube sealing machine
FAQ

Questions buyers ask before ordering

Are you a factory or a trading company?

A factory. We assemble and test in our own workshop in Renhe, Baiyun District, Guangzhou, and ship direct — there is no trading company adding a margin between the bench and your door. We are a young company, founded in 2024 on a 500 m² floor, so we compete on attention per machine rather than on catalogue size.

Can we visit the factory before ordering?

Yes. Tell us your dates and we will arrange for the machine to be running when you arrive, including a run on your own tubes if you ship samples ahead. If travel is not practical, we run your samples and send video of the seal result together with the parameters used.

Do the machines come with CE certification?

Not on the standard models. Tell us your market’s requirement before ordering and we will confirm in writing what documentation and modifications we can provide for your configuration — that is far better settled before the machine is built than after it reaches customs.

What tube sizes can the machines handle?

The TY-001 covers tubes with a sealing diameter of 15–50 mm and a length of 50–260 mm. Outside that range we quote custom tooling — send the drawing or a sample tube and we will confirm feasibility.

Can you test our tubes before we order?

Yes. Send a small batch of your printed tubes and we will run them, then send you video of the seal result together with the parameters used. That is the fastest way to settle seal strength and print registration questions.

Is the machine 220V or 110V?

The TY-001 is built for AC 220V single phase, 3 kW. Other voltages can be quoted on request — tell us the supply at your site.

What is the lead time?

It depends on the model, the tooling and the quantity. Send your tube specification and required output, and we will reply with a confirmed schedule rather than a guess.

Do you supply spare parts?

Sealing heads, trim blades and registration sensors are available as spares. We recommend keeping one sealing head and one blade on site so a changeover does not stop the line.

Send your tube spec, get a straight answer

Tell us the tube diameter and length, the material, and the output you need. You will get a model recommendation, tooling note and schedule — not a brochure.

✆ WhatsApp — fastest+86 185 2000 6634 ✉ Emailxiexuetao@htkcai.com ☎ Phone+86 185 2000 6634
⌖ Factory & office Guangzhou Tengyue Automation Equipment Co., Ltd.
No. 54 Heting Middle Road, Renhe Town, Baiyun District, Guangzhou, China

Quick inquiry

Nine fields. We come back with the model, tooling list and lead time — usually within one working day.